 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 1-1-2 Switching Mode Regulator ICs SI-8000JD Series Features * Surface-mount package (TO263-5) * Output current: 1.5A * High efficiency: 77 to 88% * Requires only 4 discrete components * Internally-adjusted phase correction and output voltage Surface-Mount, Separate Excitation Step-down Switching Mode Regulator ICs Lineup Part Number VO(V) IO(A) SI-8033JD 3.3 SI-8050JD 5.0 1.5 SI-8090JD 9.0 SI-8120JD 12.0 Absolute Maximum Ratings Parameter DC Input Voltage Output Current Power Dissipation* Junction Temperature Storage Temperature Thermal Resistance (Junction to Case) Thermal Resistance (Junction to Ambient Air) Symbol VIN IO PD Tj Tstg Ratings 43 1.5 3 +125 -40 to +125 3 33.3 Unit V A W C C C/W C/W When mounted on glass-epoxy board 40 x 40 mm (copper area 100%) When mounted on glass-epoxy board 40 x 40 mm (copper area 100%) Conditions * Capable of downsizing a choke-coil due to IC's high switching frequency (125 kHz). (Compared with conventional Sanken devices) * Built-in foldback-overcurrent and thermal protection circuits * Output ON/OFF available (Circuit current at output OFF: 200A max) * Soft start available by ON/OFF pin Conditions j-c j-a *: Limited by thermal protection circuit Applications * Power supplies for telecommunication equipment * Onboard local power supplies, etc. Recommended Operating Conditions Ratings Parameter DC Input Voltage Range DC Output Current Range* Operating Junction Temperature Range Operating Temperature Range* Symbol VIN1 VIN2 IO Tjop Top SI-8033JD 5.3 to 40 6.3 to 40 SI-8050JD 7 to 40 8 to 40 0 to 1.5 -30 to +125 -30 to +125 SI-8090JD 11 to 40 12 to 40 SI-8120JD 14 to 40 15 to 40 V A C C Unit Conditions IO=0 to 1A IO=0 to 1.5A VINVO+3V *: Limited by Ta-PD characteristics Electrical Characteristics Ratings Parameter Symbol min. VO Output Voltage Efficiency Oscillation Frequency Line Regulation Load Regulation Temperature Coefficient of Output Voltage Overcurrent Protection Starting Current Low Level Voltage ON/OFF* Pin Outflow Current at Low Voltage Conditions 3.234 SI-8033JD typ. 3.30 77 VIN=15V, IO=0.5A 125 VIN=15V, IO=0.5A 25 10 0.5 1.6 VIN=15V 0.5 100 7 VIN=15V, Io=0A 200 VIN=15V, VON/OFF=0.3V 7 VIN=20V, Io=0A 200 VIN=20V, VON/OFF=0.3V 1.6 VIN=20V 0.5 100 VSSL=0V 7 VIN=21V, Io=0A 200 VIN=21V, VON/OFF=0.3V 7 VIN=24V, Io=0A 200 VIN=24V, VON/OFF=0.3V 80 30 VIN=8 to 30V, IO=0.5A VIN=15V, IO=0.2 to 0.8A max. 3.366 min. 4.90 SI-8050JD typ. 5.00 82 VIN=20V, IO=0.5A 125 VIN=20V, IO=0.5A 40 10 0.5 1.6 VIN=21V 0.5 100 100 40 VIN=10 to 30V, IO=0.5A VIN=20V, IO=0.2 to 0.8A max. 5.10 min. 8.82 SI-8090JD typ. 9.00 86 VIN=21V, IO=0.5A 125 VIN=21V, IO=0.5A 50 10 1.0 1.6 VIN=24V 0.5 100 120 40 VIN=15 to 30V, IO=0.5A VIN=21V, IO=0.2 to 0.8A max. 9.18 min. 11.76 SI-8120JD typ. 12.00 88 VIN=24V, IO=0.5A 125 VIN=24V, IO=0.5A 60 10 1.0 130 VIN=18 to 30V, IO=0.5A 40 VIN=24V, IO=0.2 to 0.8A max. 12.24 (Ta=25C) Unit VIN=15V, IO=0.5A VIN=20V, IO=0.5A VIN=21V, IO=0.5A VIN=24V, IO=0.5A V % kHZ mV mV mV/ C A V Conditions f Conditions VOLINE Conditions VOLOAD Conditions VO/Ta IS1 Conditions VSSL ISSL Conditions Iq Conditions Iq(oFF) Conditions A mA Quiescent Circuit Current A *: Pin 5 is the ON/OFF pin. Soft start at power on can be performed with a capacitor connected to this pin. The output can also be turned ON/OFF with this pin. The output is stopped by setting the voltage of this pin to VSSL or lower. ON/OFF-pin voltage can be changed with an open-collector drive circuit of a transistor. When using both the soft-start and ON/OFF functions together, the discharge current from C3 flows into the ON/OFF control transistor. Therefore, limit the current securely to protect the transistor if C3 capacitance is large. The ON/OFF pin is pulled up to the power supply in the IC, so applying the external voltage is prohibited. SI-8000JD SI-8000JD SI-8000JD 5 ON/OFF 5 ON/OFF C3 5 ON/OFF C3 VOUT. ON/OFF Soft Start Soft Start +VOUT. ON/OFF 46 ICs SI-8000JD Series External Dimensions (TO263-5) Case Temperature Measurement Point (Unit : mm) 0.2 (0.40) 1.2 9.90 (15) 0.2 10.0 (8.0) 0.2 0.2 (4.4) 1.3 -0.05 +0.10 3-R0.3 (4.6) (1.75) 4.5 (6.8) 0.2 9.2 0.2 1.5 Dp: 0.2 (3) (2xR0.45) (3) 0.1 0.10 (3) 0.15 2.4 (R0.3) 0.3 0.2 0.88 0.10 (R0.3) 0~6 0.1 (0.5) (1.7 0.25 ) 1 2 3 4 5 0.8 0.25 ) (1.7 0.1 Pin Assignment q VIN w SWOUT e GND r VOS t ON/OFF Plastic Mold Package Type Flammability: 94V-0 Product Mass: Approx. 1.48g 9.2 0.3 15.3 0.2 2.0 15.30 0.3 (0.75) 4.9 2.54 (1.7 0.25 ) 0.8 0.25 (1.7 ) (3) 2-R0.3 10.0 0.02 (3) Block Diagram SW OUT PReg. 5 ON/OFF ON/OFF Soft Start Reset OSC + - Typical Connection Diagram L1 VIN 1 VIN SW 2 4 + Di VOUT 1 VIN OCP 2 4.9 0.2 SI-8000JD C1 + ON/OFF GND 5 3 C3 GND VS C2 Latch & Drive GND Comp. Error Amp. + - TSD 4 VREF GND 3 C1 C2 C3 L1 Di : : : : : 50V/220F 25V/470F 10V/0.47F (Only when using soft-start function) 100H SJPB-H6 (Sanken) Reference Data Copper Laminate Area on Glass Epoxy Board vs. Thermal Resistance (Junction to Ambient Air) (Typical Value) Thermal Resistance (junction to ambient air) j-a (C/W ) 55 50 45 40 35 30 0 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Output Current vs. Power Dissipation (Typical) With glass epoxy board of 40 x 40 mm Power Dissipation Pd (W) 40V 30V 20V VIN 8V 200 400 600 800 1000 1200 1400 1600 1800 Copper Laminate Area (mm2) 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Output Current IO (A) Ta-PD Characteristics 3.5 3 Copper Area 40x40 mm ( j-a : 33.3C/W) 20x40 mm ( j-a : 37C/W) 20x20 mm ( j-a :44C/W) 10x10 mm ( j-a : 53C/W) PD=VO*IO 100 VO -1 -VF*IO 1- VIN Power Dissipation PD (W) 2.5 2 1.5 1 0.5 The efficiency depends on the input voltage and the output current. Therefore, obtain the value from the efficiency graph and substitute the percentage in the formula above. VO : Output Voltage VIN : Input Voltage IO : Output Current : Efficiency (%) VF : D1 forward voltage 0.4V(IO=2A)(SJPB-H6) Thermal design for D1 must be considered separately. 0 -25 0 25 50 75 100 125 Ambient Temperature Ta (C) ICs 47 |
Price & Availability of SI-8090JD
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |